CeramicSpeed

ITA for Shimano Road Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter spindle cranks into an ITA shell. Those cranks come from Shimano, FSA, and others. CeramicSpeed bearings pressed into threaded cups, then threaded into the frame. Those bearings comprise either Standard or Coated Bearings. Super round, super smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. In The Box 2 threaded cups with bearings. 2 dust covers with built-in spacers. Spacer tube. 10mm syringe of All Round grease. Sticker sheet. Technical Data ITA bb’s, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that’s done, the system is excellent. 24mm cranks work better when mated to our bearings. To have your bike as efficient as possible, reduce mechanical drag. Bottom brackets have a measurable effect on speed. CS balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. They reduce the drag of our Standard Bearing bb’s by 75% when compared to typical bottom brackets. The bearings last at least 3x longer than other bearings. These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you’re riding in wet conditions, more durable LongLife Grease can be put in.

OSPW Aero for Shimano 9250 and 8150 The world’s fastest Pulley Wheel system just got faster. OSPW Aero features a lifetime warranty and is wind-tunnel tested to have 40% less friction compared to a stock derailleur, making it perfect for time trials or triathlons. The OSPW Aero is an industry-leading product co-developed with one of the world’s leading aerodynamicists; Simon Smart and is chosen by World Champions and top athletes around the world. This OSPW system has hand built CeramicSpeed Bearings installed and its unique design and craftsmanship will captivate you from the first time you use it. The system features a 13-tooth upper Pulley Wheel and a 19-tooth lower Pulley Wheel to provide absolute optimization of the rear derailleur, and the upper and lower oversized aluminum Pulley Wheels come fitted with coated CeramicSpeed Bearings that have been perfected through years of experience. The OSPW Aero for Shimano Dura Ace 9200 and Ultegra 8100 has an integrated stop tower for simple installation and durability.

OSPW Aero for SRAM Red/Force AXS Codeveloped with Simon Smart and Drag2Zero. Technical data Cage Material: Carbon reinforced PA Pulley Material: Aluminum Pulley Size: 15/19 Bearing options: CeramicSpeed Coated bearings CeramicSpeed Grease/Oil: Pulley Oil (standard) Compatibility: SRAM Red AXS, SRAM Force AXS Spring Tension Settings: 3 settings Speed: 12 speed Discipline: Road

OSPW for Shimano 9100/9150 and 8000 SS/8050 SS This is an updated version of the Oversized Pulley Wheel System for Shimano 9100/9150 and 8000 SS/8050 SS. This new design has an integrated stop tower for easier mounting. The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world, providing energy savings starting from 2.4 watts over standard Shimano systems. The OSPW system for Shimano 9100/9150 and 8000 SS/8050 SS is an industry leading product, chosen by many of the world's leading cycling teams and professional triathletes. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimization of the rear derailleur. The upper and lower oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. Please note: The OSPW System for 9100/9150 and 8000 SS/8050 SS is NOT compatible with Ultegra 8000-GS or 8050-GS (medium cage) derailleurs, nor with the clutch equipped Ultegra RD RX800 & RX805. Please note while there are design similarities this OSPW is not compatible with the 12-speed Shimano 9200 or 8100 series derailleurs. The Shimano 9100/8000 OSPW system is compatible up to a 32-tooth cassette for both Dura Ace & Ultegra derailleurs In The Box Complete 13-tooth/19-tooth OSPW System CeramicSpeed Oil for Pulley Wheel Bearings, 15ml. dropper bottle

OSPW for Shimano Dura Ace 9250 and Ultegra 8150 The Oversized Pulley Wheel System for Shimano Dura Ace 9200 and Ultegra 8100 with integrated stop tower for simple installation and durability. The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world. CeramicSpeed OSPW Systems are an industry leading product, chosen by World Champions and top athletes around the world. This OSPW System has hand built CeramicSpeed Bearings installed in each pulley and comes with a 4-year warranty as standard and a lifetime warranty when choosing coated or SLT bearings. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimization of the rear derailleur. The upper and lower oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. Please note while there are visual similarities in the 9100 Series OSPW and 9200 Series OSPW, the spring tension settings, rotation stop tower placement, and mounting pin depth are slightly repositioned and as such the systems are not cross compatible. For 8100 derailleurs, the cage uses the factory derailleur body washer. 9200 derailleurs will require the new included derailleur body washer. In The Box A complete 13-tooth/19-tooth OSPW System CeramicSpeed Oil for Pulley Wheel Bearings, 15ml. dropper bottle

The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminum threaded bottom bracket that threads into itself. Ours are finished with CeramicSpeed Bearings. You have two choices in terms of bearings. The first choice is our low drag, long life standard bearing, with hardened-steel races and our super round CeramicSpeed Balls. The second choice is our coated bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box 1 bottom bracket with bearings installed. 2 dust covers installed. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.

The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminum threaded bottom bracket that threads into itself. Ours are finished with CeramicSpeed Bearings. You have two choices in terms of bearings. The first choice is our low drag, long life standard bearing, with hardened-steel races and our super round CeramicSpeed Balls. The second choice is our coated bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box 1 bottom bracket with bearings installed. 2 dust covers installed. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. You have two bearing choices. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box 2 bearings. 2 1mm spacers 2 0.5mm spacers. 2 dust covers. O-ring. 10mm syringe of grease. Sticker sheet.

Shimano cranks fit into BB86 frames when you have this CeramicSpeed Bottom Bracket installed. The kit consists of two cups that are pressed into either side of the central opening. The cups come with CeramicSpeed Bearings installed. There are two versions. The first is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed Balls. The second version is our coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box 2 bottom bracket cups with bearings installed. 2 dust covers with integrated spacers installed. Spacer tube. 10ml syringe of All Round Grease. Sticker sheet.

Shimano cranks fit into BB86 frames when you have this CeramicSpeed Bottom Bracket installed. The kit consists of two cups that are pressed into either side of the central opening. The cups come with CeramicSpeed Bearings installed. There are two versions. The first is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed Balls. The second version is our coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box 2 bottom bracket cups with bearings installed. 2 dust covers with integrated spacers installed. Spacer tube. 10ml syringe of All Round Grease. Sticker sheet.

The CeramicSpeed BB86 SRAM GXP Road Bottom Brackets are compatible with press-fit specific bike frames only. The shell diameter is 41mm ID, and when the bearings and cups are pressed in, they fit the 24/22mm SRAM and Quarq spindle. There are two versions of the CeramicSpeed Bearings that come installed in the cups. The first is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed Balls. The Coated Bearing is our second version, which uses those same balls installed on coated, hardened-steel races for longer life and lower drag. In The Box 2 cups with bearings installed. 2 dust covers. 1mm spacer. 0.5mm spacer. GXP wave washer. Plastic cable protector. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.

Shimano cranks fit into BB86 frames when you have this CeramicSpeed Bottom Bracket installed. The kit consists of two cups that are pressed into either side of the central opening. The cups come with CeramicSpeed Bearings installed. There are two versions. The first is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed Balls. The second version is our coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. In The Box 2 bottom bracket cups with bearings installed. 2 dust covers with integrated spacers installed. Spacer tube. 10ml syringe of All Round Grease. Sticker sheet.

The new SRAM DUB crank standard, built on a 28.99 spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency. In the box: 2 CeramicSpeed Bearings Dustcovers Plast-sheet 4 x 1mm spacers 10ml syringe of CeramicSpeed All Round Grease Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99 spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency. In the box: 2 CeramicSpeed Bearings Dustcovers Plast-sheet 4 x 1mm spacers 10ml syringe of CeramicSpeed All Round Grease Sticker Sheet

The CeramicSpeed BB86 SRAM GXP Road Bottom Brackets are compatible with press-fit specific bike frames only. The shell diameter is 41mm ID, and when the bearings and cups are pressed in, they fit the 24/22mm SRAM and Quarq spindle. There are two versions of the CeramicSpeed Bearings that come installed in the cups. The first is our low drag, long life Standard Bearing, with hardened-steel races and our super round CeramicSpeed Balls. The Coated Bearing is our second version, which uses those same balls installed on coated, hardened-steel races for longer life and lower drag. In The Box 2 cups with bearings installed. 2 dust covers. 1mm spacer. 0.5mm spacer. GXP wave washer. Plastic cable protector. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.

BB90 is the Trek oversized bottom bracket standard and is only found on Trek road bikes. The shell is 90.5mm wide and is designed to work with 24mm spindles and road cranks and have the bearings inside the shell. The CeramicSpeed Bearings come as two bearings, which are then pressed into the frame. Those two bearings consist of either CeramicSpeed Standard or Coated Bearings. Both feature super smooth, super round CeramicSpeed Balls contained in hardened-steel races. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. In The Box 2 BB90 bearings. 2 seals. 2 dust covers with integrated spacers. 10ml syringe of All Round Grease. Sticker Sheet.

BB90 is the Trek oversized bottom bracket standard and is only found on Trek road bikes. The shell is 90.5mm wide and is designed to work with 24mm spindles and road cranks and have the bearings inside the shell. The CeramicSpeed Bearings come as two bearings, which are then pressed into the frame. Those two bearings consist of either CeramicSpeed Standard or Coated Bearings. Both feature super smooth, super round CeramicSpeed Balls contained in hardened-steel races. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. In The Box 2 BB90 bearings. 2 seals. 2 dust covers with integrated spacers. 10ml syringe of All Round Grease. Sticker Sheet.

Trek developed their own bb standard to optimize their frame designs. BB90 has a 90.5mm shell width and 37mm inner diameter and is designed so that the bearings of external cups can hide within the frame. The CeramicSpeed kit comes as two bearings, which are then pressed into the frame. Those two bearings consist of either CeramicSpeed Standard or Coated Bearings. Both feature super smooth, super round CeramicSpeed balls rotating in hardened-steel races. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in longer life and lower drag. In The Box 2 bearings. 2 dust covers. GXP wave washer. Plastic cable protector. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.

BBright is the Cervélo bottom bracket standard, found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. In The Box 1 bottom bracket with bearings installed. 2 dust covers. 10ml syringe of All Round Grease. Sticker sheet.

BBright is the Cervélo bottom bracket standard, found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. In The Box 1 bottom bracket with bearings installed. 2 dust covers. 10ml syringe of All Round Grease. Sticker sheet.

BBright for SRAM DUB Road The new SRAM DUB crank standard, built on a 28.99 spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency. In the box: 2 cups with CeramicSpeed Bearings installed 2 dustcovers Spacer-tube 4 x 1mm spacers CeramicSpeed All Round Grease Sticker sheet

If you have a Cervélo, chances are your bike has the BBright bottom bracket standard. P5s don’t; same with older frames. Fitting SRAM and Quarq cranks into this 79-92mm wide, 46mm diameter shell, this bottom bracket, complete with CeramicSpeed bearings, needs to be pressed in. The unit comes with either CeramicSpeed Standard or Coated Bearings installed into cups. Super smooth, super round CeramicSpeed balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. In The Box 2 cups with bearings installed. 2 dust covers. 1mm spacer. 0.5mm spacer. GXP wave washer. Spacer tube. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.

The BSA, or English threaded, bottom bracket is a traditional shell size. It has an inner diameter of 34mm and is 68mm wide. These cups thread into the BSA shell making it possible to install SRAM and Quarq 24/22mm spindle cranks. The CeramicSpeed kit comes with bearings pressed into threaded cups, which are then threaded into the frame. Those bearings consist of either CeramicSpeed Standard or Coated Bearings. Super smooth, super round CeramicSpeed balls are rotating in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in longer life and lower drag. In The Box 2 threaded cups with bearings installed. 2 dust covers. 1mm spacer 0.5mm spacer. GXP wave washer. Spacer tube. 10ml syringe of CeramicSpeed All Round Grease. Sticker sheet.