SRAM

The Avid 20R Brake Shoes are symmetrical, for use on front or rear linear pull brakes. 20R pads are symmetrical, for use on front or rear linear pull brakes All complete brake pads include mounting hardware Color: Black Pad Type: One Piece Intended Brake Type: Linear Pull Pad Attachment Style: Threaded Post Rim Compatibility: Standard

Designed for use with Avid and Sram disc brakes for the best possible performance Organic w/ steel backing plate Pad Style ID: 1 Compatibility: Avid BB5 / Box Three / Promax DSK-300 Pad Material: Organic Compound: Standard Brand: Avid Backplate: Steel

Original equipment pads for no-compromise disc brake performance. Aluminum backed organic pad is quiet and lightweight Each pad kit includes two pads, a pad spreader spring, pad pin and clip Not compatible with Centerlock or HSX rotors Heat Sink: No Pad Shape Number: 03 Backing Plate Material: Aluminum Compound: Organic

Original equipment pads for no-compromise disc brake performance. Steel backed organic pad is quiet Each pad kit includes two pads, a pad spreader spring, pad pin and clip Heat Sink: No Pad Shape Number: 03 Backing Plate Material: Steel Compound: Organic

*AXS enabled for easy monitoring and firmware upgrades *Bluetooth Low Energy and ANT+ compatible *Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride *Uses a common CR2032 battery that last for 200 riding hours and changes without tools *Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48

Sram 1:1 compatible Composite body and lever Unilever technology Left/Right/Pair: Right Speeds: 7s Ratio: 1 to 1 Color: Blk Weight: 132g

Brake Caliper Type: Flat Mount Mount | Rotor Size: Front Flat | 140 Rotor, Front Flat | 160 Rotor

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Stainless steel sealed cartridge bearings Fits Brand: SRAM Drivetrain Speeds: 11

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Stainless steel sealed cartridge bearings

Brake Caliper Type: Flat Mount Mount | Rotor Size: Rear Flat | 160 Rotor

Affordable shifters with the time-tested GripShift design and construction. Compatible with SRAM rear derailleurs designed for 9 or fewer cogs. Color: Black Shifter Style: Twist Rear Der/Shifter Compatibility: SRAM 1:1 Drivetrain Speeds: 8 Weight: 70 grams

Replacement Sram/Truvativ chainring bolt sets Mount Compatibility: Truvativ 4 arm single (No Guard) Material: Steel Color: Black

PitStop 5.1 brake fluid is perfectly designed to suit the needs of Avid hydraulic brake system. DOT-5.1 non-silicone formulated hydraulic brake fluid Designed to maximize the performance of Avid brakes DOT 5.1 has a higher boiling point than DOT 3 and 4 fluids Vacuum sealed Compatible with all SRAM and Avid hydraulic disc brakes

Color: Silver Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed Drivetrain Speeds: 9 Defined Color: Silver Cassette Cogs: 11-12-14-16-18-21-24-28-32 Weight: 372 Range: 11-32

USB-C interface for improved conductivity and broad compatibility 60-minute charge time for four batteries, faster for one or two LED lights indicate charge status and power draw Benchtop or wall mountable design

Ergonomic design for comfort in a variety of hand positions. For eTap AXS hydraulic brake levers

PowerLock links provide tool free chain assembly. For use with SRAM 12-speed road chains only No tools necessary to install From a long line of tough, light-weight chain engineering from SRAM Drivetrain Speeds: 12

SRAM BB30/English Bottom Bracket Adaptor Allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only Install with headset press and green Loctite Comes with Loctite, needed for proper installation Use headset cup press to install

Replaces standard drop bar shift levers Simple and intuitive eTap® shift logic AXS™ enabled for easy personalization Limitless aero configurations Two ports per side for Blips™ Fits the included optional stem mount Compatible with existing eTap® Blips™ and Clics™ Mounts inside stem faceplate cap, feed box or frame (See user manual for details.) Now backwards compatible with 11-speed eTap derailleurs

Limitless remote shifting positions for drop and aero bars Compatible with SRAM RED® eTap® and SRAM eTap® AXS shift/brake controls Compatible with BlipBox™ Aero cockpit control

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. Fits all SRAM road braze-on front derailleurs, also fits Shimano ChainSpotter not included comes with New Red Braze-on front derailleur, or available separately Front Derailleur Clamp: 34.9 (1-3/8"), Braze-on

Ergonomic design for comfort in a variety of hand positions.

Road Inserts Excellent performance in wet conditions Interchangeable with current Dura-Ace and Ultegra Color: Yellow Post Mount Type: Replacement Insert-Road Pad Use: Carbon Rim Brake Fit: Road Calip